Pentair Clean & Clear RP Cartridge Filter 200 || EC-160353

Pentair Clean & Clear RP Cartridge Filter 200 sq ft | EC-160353

High-efficiency side-entry cartridge pool filter by Pentair (SKU EC-160353) with 200 sq ft media area and side-entry design to trap finer particles.

Features

• Side-entry cartridge design delivers nearly 50% greater hydraulic efficiency compared to typical single-cartridge filters.
• 200 sq ft filtration area supports enhanced debris-holding capacity and finer micron filtration (~20 microns).
• Fiberglass-reinforced polypropylene tank construction for superior corrosion, chemical, and UV resistance.
• Quick-connect low-force union and diamond-seal make installation and servicing faster and easier.
• High-Flow™ manual air-relief valve plus continuous internal air-relief maintains optimal filtration performance.
• Recommended maximum system flow is around 150 GPM to protect media life and water clarity. 

Description

The Pentair Clean & Clear RP Cartridge Filter 200 sq ft (SKU EC-160353) is built for demanding residential pool applications where clarity, performance, and ease of service matter. Its advanced side-entry design improves water flow and efficiency, while the large cartridge area captures fine debris and extends run times. The tank’s rugged polypropylene/fiberglass build ensures long-term durability under heavy chemical exposure. With features like the quick-connect union and high-flow air relief, this model delivers premium cartridge filtration in a convenient, service-friendly package.

Pro Tip

Ensure your pump’s flow remains under ~150 GPM and verify your plumbing size matches the inlet/outlet for this filter. Allow at least 12-16″ above and around the tank for cartridge removal access. Regularly check the O-ring seal, lock-ring ring closure, and rinse cartridges when pressure rises ~10 psi above the initial reading.

Installation Tips

High-level safety/compatibility notes only: Turn off the pool pump and relieve all system pressure before servicing or installing. Ensure the equipment pad is level and rated to support the tank plus water load. Confirm the plumbing port size (2″ x 2½″) and orientation match your system. Lubricate the O-ring and ensure the lock-ring safely clicks into place. Do not exceed the maximum continuous operating pressure of 50 psi or the maximum water temperature of 104 °F (40 °C) per manufacturer limits.